Be sure to match the plywood thickness to the drywall thickness. The plywood will be barely noticeable if done right. Sand the surface smooth, prime, and paint. To provide a clean finish, the drywall can be cutout and the opening filled with the plywood. Plywood can be attached to the wall studs using 3-1/2" lag bolts with fender washers. You will need to use wood in some form to add the necessary strength. If it was a mount that didn't have motion, I might say that's acceptable, but not with a swivel mount. I'd also comment that I have no intention of using the swivel feature.ĭo not use drywall anchors to hang a TV that large on a swivel mount. Between 8 anchors/toggles totaling almost 900 lbs with 2 of them mounted into a steel beam seems to me that it would be sufficient. What if I use the drywall toggles to mount the TV in the 2 holes nearest the center of the mount, then use Drywall anchors with a high weight rating in the other 6 holes. I am going to propose the following and ask what people think. So I bought drywall toggles rated to 110 lbs. It seems like this will work, but I don't want to take chances with the TV. So 2 screws into the anchors and 2 screws into the stud. The anchors I have say they will hold up to 110 lbs. Or the second is a little easier, I can mount the TV into 1 stud and use heavy duty anchors on the other side of the mount. First, put a piece of 3/4" ply wood into the studs and mount the tv on the ply wood. ![]() The mount does swivel so it might be pulled on to swivel the tv. The tv weighs 53 lbs and the mount is at most 20 lbs. I have a TV mount that is about 20" wide. I have read several questions on here regarding this topic but my situation is slightly unique.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |